Shanglin Science and Technology

The use of thermal conductive silicone grease

First, wipe with a clean cotton cloth or cotton ball. After wiping, dry the processor to ensure the surface is dry.

Apply thermal paste is to first determine the size of the contact surface between the radiator base and the heat source, and apply the thermal paste with less amount.

put your fingers in a plastic bag, and then rub the thermal paste on the bottom of the radiator with your fingers until the thermal paste evenly covers the entire contact area. Ensure that the thermal paste can fill the gaps and uneven areas at the bottom of the radiator. Note: Do not apply directly with your fingers!

Finally, when installing the radiator, press it, and do not rotate and move the radiator, otherwise it will cause the problem of uneven thermal paste between the radiator and the heat source, and there may be bubbles that affect heat dissipation.

Related News

The role of electronic cleaning agent

Cleaning agents are widely used in electronic manufacturing processes, and are often used to remove potential flux, solder paste, adhesive residue, and other common contaminants such as dust and debris in the production of PCBs. Cleaning can ensure that the components have a good surface resistance, to prevent leakage caused by the failure of the PCB board to fundamentally extend the service life of the product.

The use of thermal conductive silicone grease

First, wipe with a clean cotton cloth or cotton ball. After wiping, dry the processor to ensure the surface is dry. Apply thermal paste is to first determine the size of the contact surface between the radiator base and the heat source, and apply the thermal paste with less amount.

Morphological difference between conductive silver paste and conductive silver glue

Conductive silver paste: A viscous paste of a mechanical mixture of high-purity (99.9 percent) metallic silver particles, binders, solvents, and additives. The conductive silver paste generally contains a solvent.